104.95169.954

Load Handler

Load Handler Pickup Truck Unloader

The LoadHandler - Helping Truck Owners Get Unloaded Since 1993: 'No Shoveling, No Climbing, No Bad Back' Free Ground Shipping to anywhere in the lower 48 states! Spare yourself the backbreaking work of unloading sand, clay, trash, eq
Load HandlerLoad Handler Pickup Truck Unloader
Load Handler Pickup Truck Unloader
Easy Operation
Load Handler Pickup Truck Unloader

Load Handler

Load Handler Pickup Truck Unloader

From: $104.95
FREE Ground Shipping
Details
The LoadHandler - Helping Truck Owners Get Unloaded Since 1993: "No Shoveling, No Climbing, No Bad Back" Free Ground Shipping to anywhere in the lower 48 states! Spare yourself the backbreaking work of unloading sand, clay, trash, equipment, hay ... read more
  • Padded brackets and tie-down straps secure to any tailgate
  • Heavy gauge poly fabric rolls onto steel bar that runs the length of tailgate
  • Easy, quick installation
  • For more questions about this product, please Contact Us
Description

The LoadHandler - Helping Truck Owners Get Unloaded Since 1993:
"No Shoveling, No Climbing, No Bad Back"


Free Ground Shipping to anywhere in the lower 48 states!


Spare yourself the backbreaking work of unloading sand, clay, trash, equipment, hay bales, feed bags, dirt, furniture and rock!
Finish jobs faster with LoadHandler. Padded brackets and tie down straps secure the Loadhandler to any tailgate and installs or removes in about a minute. The LoadHandler consists of a heavy gauge poly fabric rolled onto a steel bar that runs the length of the tailgate. To load, just unroll the drag sheet to cover your truck bed. To unload, lower the tailgate, insert the crank handle into the end of the roller bar and rewind the drag sheet.Loads by covering truck bed with high-strength poly fabric drag sheet. Unloads by lowering tailgate and rewinding the dragsheet onto steel bar. Makes unloading sand, gravel, dirt, rock, clay, trash, equipment, hay, bales, feed bags, furniture, etc. easy.

The Loadhandler unloads up to 3000 lbs. of any kind of material from your pickup truck in 30 seconds.

  • Easy to install, comes on & off in about a minute. 
  • Belts onto tailgate - no welding or drilling.


NOTE: Loadhandler units have adjustable brackets that belt onto the tops of tailgates, so it is the width of the tailgate (left to right, or Driver Side to Passenger Side) that is important in determining which Loadhandler models will fit your truck.

  • Bed length and type of cab are not important in determining which Loadhandler model to purchase.
    Full-Size (fleetside) tailgate widths range from 61" - 67" and accommodate either the LH2000 or LH3000.
    Mid-Size (fleetside) tailgate widths range from 52" - 57" and accommodate the LH2000M.
    Step-Side (flair-side or non-fleetside) tailgate widths range 44" - 52" and accommodate only the LH2000M.
    Both Full-Size and Mid-Size step-sides take the LH2000M.  Some, but not all, F-150 Super Crews, 2008 and older, (the 2009 and newer Super Crews have regular full-size tailgates) take the LH2000M because of a tapered tailgate of 52". For Mid-Size step-sides (Ford Ranger, Chevy S-10, etc.), dragsheet widths need to be trimmed 4"-5" inches in order to fit the narrow tailgates.

LH2200

- Chevy Silverado
- Dodge Ram
- Ford F-Series
- GMC Sierra
- Nissan Titan
- Toyota T100 and Tundra

Best model for 1/2-ton trucks. Also recommended for light-duty on 3/4- and 1-ton trucks. Does not fit some 2008 and older F-150 Super Crews.  Please measure width of your Super Crew tailgate to be sure.  61" - 67" wide is full-size and 52" - 57" is mid-size.


EXCEPTIONS: The new "extra-wide" brackets have arrived!  The new brackets are designed to fit any new 1/2-ton (extra-wide brackets are not necessary for 3/4-ton and 1-ton trucks) with an extra-wide tailgate and/or an extra-wide tailgate cap.  The new brackets open to maximum 6 inches wide; our regular brackets open to 3.5 inches maximum.  Following are full-size trucks that "probably" need the extra-wide bracketing: 2008 & newer Chevy/GMC 1500 (Silverado & Sierra), 2008 & newer Dodge Ram 1500, and "some" 2009 & newer Ford F-150s (not all new F-150s have wide tailgates).  Newer model truck owners should measure their own tailgate widths, on the far-right and far-left sides of the tailgate, or tailgate cap, where the Loadhandler unit attaches.  If wider than 3.5", then the new wide brackets are needed.  The extra-wide brackets are special order only. The extra-wide brackets are free to customers with new Loadhandlers and $15 + $8 shipping and handling (continental U.S. for $8 shipping) for customers with used Loadhandlers.

LH2200M

Universal Mid-Size/Compact Standard - Unloads up to 2200 lbs.
Fits all Mid-Size, Compact and all Step-Sides

- Chevy S-10 & Colorado
- Dodge Dakota
- Ford Ranger & F-150 Super Crew
- GMC Sonoma & Canyon
- Honda Ridgeline
- Isuzu
- Mazda
- Mitsubishi Raider
- Nissan Frontier
- Toyota Tacoma

Best model for all Mid-Size trucks.
Also best model for all Step-Sides (both Full-Size and Mid-Size/Compact Step-Sides).  Need to trim dragsheet width (from 42" wide to approx. 37") on mid-size/compact step-sides in order to make room for brackets to attach to narrow tailgate.

LH3000

Universal Full-Size Heavy-Duty
Fits all Full-Size pickups (except Step-Sides and Toyota 2006 and older), including 1/2-ton, 3/4-ton and 1-ton
- Chevy Silverado
- Dodge Ram
- Ford F-Series
- GMC Sierra
- Nissan Titan
- Tundra 2007 & newer

Best model for heavy use on all Full-Size trucks, especially 3/4- and 1-ton trucks. Fits all Full-Size trucks except Step-Sides, some 2008 and older F-150 Super Crews (see explanation above under LH2200) and Toyota T100 & Tundra 2006 & older.

The LH3000 is the most suitable Loadhandler for trailer and flat-bed application, although modification by consumer may be required.
EXCEPTIONS:  The new "extra-wide" brackets have arrived!  The new brackets are designed to fit any new 1/2-ton (extra-wide brackets are not necessary for 3/4-ton and 1-ton trucks) with an extra-wide tailgate and/or an extra-wide tailgate cap.  The new brackets open to maximum 6 inches wide; our regular brackets open to 3.5 inches maximum.  Following are full-size trucks that "probably" need the extra-wide bracketing: 2008 & newer Chevy/GMC 1500 (Silverado & Sierra), 2008 & newer Dodge Ram 1500, and "some" 2009 & newer Ford F-150s (not all new F-150s have wide tailgates).  Newer model truck owners should measure their own tailgate widths, on the far-right and far-left sides of the tailgate, or tailgate cap, where the Loadhandler unit attaches.  If wider than 3.5", then the new wide brackets are needed.  The extra-wide brackets are special order only. The extra-wide brackets are free to customers with new Loadhandlers and $15 + $8 shipping and handling (continental U.S. for $8 shipping) for customers with used Loadhandlers.

 

LH3000M

The LH3000M is used for Mid-Size trucks or any full size trucks whose tailgates are shorter than 61" across.

 

LOADHANDLER® MODEL SPECS:

MODEL

ROLLER BAR

DRAGSHEET ( W x L )

UNIT WEIGHT

CAPACITY

LH3000

67"

50" x 15'

31 lbs.

3000 lbs

LH3000M

60"

42" x 15'

29 lbs.

3000 lbs

LH2200

68"

50" x 15'

21 lbs.

2000 lbs

LH2200M

60"

42" x 15'

19 lbs.

2000 lbs

Application List
ImageSKU / Part NoApplicationPriceAdd to Cart
LH2200 LH2200Size: Full Size 2200 lbs.$104.95BUY
+ -
LH3000 LH3000Size: Full HD 3000 lbs.$169.95BUY
+ -
LH2200M LH2200MSize: Mid-Size 2200 lbs.$104.95BUY
+ -
LH3000M LH3000MSize: Mid Size HD 3000 lbs.$169.95BUY
+ -
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Specifications
Questions & Answers

Be first to ask a question


Established in the Blue Ridge foothills of North Carolina in 1963, Leonard Buildings and Truck Accessories is a privately owned retailer, manufacturer and distributor whose product lines include storage buildings, cargo and utility trailers, truck covers and accessories, carports, playhouses, and pet and animal structures. We serve our residential, commercial and government customers through our 57 factory outlet stores in the five-state region of North Carolina, South Carolina, Virginia, West Virginia and Tennessee.

SIGN UP FOR OUR NEWSLETTER
and receive special deals and discounts.

CONTACTS

Leonard Truck Accessories
P.O. Box 1728

Mount Airy, NC 27030

Toll Free: 888-590-4769
Email: orders@leonardaccessories.com

Open: 24hrs

TEASoftware