(1)
When it comes to strength and weight, the Hitchgate Solo packs a powerful punch. With the same tow rating as its bigger siblings and the capacity to carry a 35-inch tire (on a mid-sized truck), the Solo is ready for whatever the adventure calls for. The Hitchgate Solo was designed to ...
Wilco OffroadWilco Offroad
TireGate HitchGate Offset Hitch Mounted Tire CarrierCarry Up to a 40" Tire on a Full Size Truck
The Wilco Offroad Hitchgate Offset spare tire carrier universally fits on virtually all vehicles with a Class III hitch receiver. This swing-away, spare tire carrier mounts to any 2-inch receiver and is perfect for SUVs, Jeeps, vans and pickups. This tough tire carrier secures up to a 40-inch spare tire while maintaining ground clearance, and minimal change in departure angles when driving ...
Upgrade your Truck Bed with our TireGate Bed Mount Angled Tire Carrier! Bed Mount Pre Runner mounts your spare tire directly to the truck bed at a rearward-facing 30-degree angle that provides a more ergonomic position for faster tire changes. The machined aluminum wheel hub, threaded rodand polyurethane wheel cone keeps the spare rock-solid in the bed while allowing for quick wheel changes. ...
Part No: WIL-UBM24041
Carry an Over Size Spare Tire by Utilizing Your 2" Hitch Receiver! (May interfere with back-up video and/or sensors) This new swing-away spare tire carrier mounts to your 2" (Class III or greater) receiver in minutes. The HitchGate is perfect for SUVs, Jeeps, vans and pickup trucks. It opens wide to allow full access to the vehicle's cargo space. This tough universal tire carrier allows you ...
Part No: UHG1060
Wilco OffroadWilco Offroad
Tiregate PreRunner SeriesUpgrade your tailgate with a TireGate!
Carry an over size spare tire while maintaining your trucks ground clearance and bed space. NEW! "Y" Bar with Urethane Cone for Quick Mount/Dismount of Wheel. The PRERUNNER Series is our signature TireGate. We have tens of thousands of test and prerun miles on this product and it has exceeded all expectations. This PreRunner tire carrier allows you to haul up to a 40" tire (35" tire on ...
Wilco OffroadWilco Offroad
Tiregate VT Vertical Replacement Tailgate Tire Mount CarrierUpgrade your tailgate with a TireGate!
Carry an Over Size Spare Tire While Maintaining Your Truck's Ground Clearance and Bed Space! VT Gate, available with optional Hi-Lift jack mount (p/n: HL65000-B) The VT TireGate line is perfect for camping, crawling, working or everyday use. The VT Series TireGate is mounted vertically behind the truck, over the rear bumper. It opens wide to ...
Upgrade your Truck Bed with our TireGate Flat Bed Mount Tire Carrier! Wilco Off-Road Bed Mount tire carrier mounts an over size spare tire directly and securely to the truck bed. A large mounting plate is employed to distribute the extreme loads encountered when covering rough terrain off-road. The machined aluminum wheel hub, threaded rodand polyurethane wheel cone keeps the spare rock-solid in ...
Part No: WIL-UBM3030
(1)
License plate relocation kit requires wiring, may be required for certain state ...
Part No: UHG32204
TITAN Fuel TanksTITAN Fuel Tanks
In Bed Tire Mount Spare Tire BuddyGreat For Carrying Extra Tire or Moving Your Spare Into The Bed
No more crawling under your truck for the spare Simple to use, to install or to remove No drilling, cutting or welding required for installation An adjustable wrench, a knife, and tape measure are the only tools needed Install anywhere on rails in bed Can be used with most bed liners Securely holds most any size tire Lockable Plated and powder coated finish for long-lived good ...
Part No: 9901330
For Solo, SoloXL, and Classic works with a RotoPax handle to secure up to 3 gallon ...
Part No: UHG31964
The spare tire carrier is ideal for relocating spare tires to the front of the vehicle using a front mounted receiver. It has a universal bolt pattern for mounting a variety of tire sizes. See more products in Cargo Management > Tire ...
Part No: DWT-6715
The License Plate Relocation Kit is made from steel and used to keep your license plate visible while having a Hitchgate installed. This optional part may be required to meet certain state laws. Wiring is required upon installation. It includes an LED Light, Steel Back Plate, and Wiring Kit. Wilco proudly makes their products in the USA. This kit is to be used with part number UHG1060 and UHG1070, ...
Part No: LPR25676
Kit Includes: Mounting Bar, 2 Mounting Trays and 2 Straps for Red 5 gal. Jerry Cans. Mount Only Cans Not Included. ...
Part No: HAT2000-GK
Hi-lift jack jerry can mount For UHG1060 UHG1070 only. Mount Hi-Lift Jack vertically & 1 Metal Jerry Can (No can ...
Part No: HLG25663-KIT
Horizontal behind and below tire mount bolts behind tire mount, includes bolts. Jack Not Included. Item is pictured installed on existing Tire Carrier. Use with UHG1060/UHG1070 NOT ...
Part No: HL60000
Mount a Hi-Lift Tire Jack horizontally on Tiregate VT and other Tiregate Tire Mounts. See more products in Cargo Management > Tire ...
Part No: WIL-HL65000-B
Kit Includes: Mounting Bar, 2 Mounting Trays & 2 Straps for Green Plastic 5 gal. Jerry Cans (cans not ...
Part No: HAT2000-GKG
N-FAB's Channel Mounted Tire Carrier can be mounted to hold the tire in either a forward or rearward facing orientation. Designed specifically for Toyota Tundra and Tacoma with factory rails. Using the factory rails it can slide along the channels for easy access. Heavy duty fully welded 1-piece construction in textured black powder coating. Tire tie down straps are included. Designed ...
Built to carry heavier tires up to 37 inches. Pivots on 1.5 inch solid steel shaft pin. Shaft is welded not bolted. Structural t-joint welds. Polyurethane pad reduces rattling. See more products in Cargo Management > Tire ...
N-FABN-FAB
Bed Mounted Spare Tire Carrier for Ford F-150 RaptorUses Factory Bed Bolts No Drilling Required
N-FAB's bed mounted Tire Cage lets you access those oversized tires easily while keeping them securely mounted in your pickup truck bed. Allows for mounting up to 2 tires Fully welded construction Mounts using factory bed bolts Straps included Accommodates up to 40" diameter tires Carries 2 Tires upright or 1 tire laid flat. 5-Year Finish Warranty And Limited Lifetime Structural ...
Wilco OffroadWilco Offroad
Max Cargo Basket
Steel Cargo Basket by Wilco Offroad works with the Hitchgate Max and Jeep Tiregate Carriers. This carrier holds up to 50lbs and provides additional storage above your tire. ...
Part No: CBEXP1
Laser cut tray Kit Includes 1 Mounting Tray & 1 Tie Down Strap for Red Metal Jerry Can by itself does not adapt to UHG series. Gas Can Not ...
Part No: HGG2070-Kit
Wilco OffroadWilco Offroad
Hitch Extension
Wobble free hitch extension extends/raises hitch for greater ...
Part No: HE31973
Mount Hi-Lift Jact vertically and One Green Plastic Jerry Can (No Can or Jack Included) hi-lift jack jerry can mount (green/plastic) For UHG1060 UHG1070 only. ...
Part No: HLG25663-G-KIT
N-FABN-FAB
Universal Truck Bed Mounted Steel Tire CarrierHolds Up to 40" Diameter Tire
N-FAB Bed Mounted Universal Tire Carrier mounts in virtually any pickup truck bed. Carry an additional tire or one that won't fit in your OEM Carrier. Heavy-Duty Rapid Straps are included. The unique carrier design raises the tire at a 15-degree angle for easy lifting.. The 'V' design and upward angle allow the tire carrier to be used as a motorcycle, dirt bike or bicycle chock. Fully ...
Laser cut tray Kit Includes 1 Mounting Tray & 1 Tie down Strap for Plastic Green Jerry Can by itself does not adapt to UHG series. Gas Can Not ...
Part No: HGG3030-Kit
N-FABN-FAB
Spare Tire Carrier Rapid Strap 33" to 40" Bed MountedSecures Off-Road Tires From 33" to 40" in Diameter
N-FAB Rapid Strap works in any pickup truck bed. Secures a tire from 33" to 40" in diameter. The front ratchet style strap combined with two fixed length rear straps and high strength steel buckle secures the tire safely. Easily removed for bed access. Steel portions are finished in gloss or textured black powder coating. Straps are available in Blue, Black or Red. Designed to ...
Mount a Hi-Lift jack vertically to UHG 1060 or 1070 (Jack Not ...
Part No: HLT6010
Carry up to a 40-inch spare tire with optional flat roof tire mounting ...
Part No: ADV27928
Hi-Lift Jack Mount Horizontal, Front 3 in. ...
Part No: HLT3X2-HG
N-FABN-FAB
Spare Tire Relocation Bracket for Jeep Wrangler JKMount Spare Tire up to 35" in Diameter in Your Factory Location
N-FAB's Jeep Wrangler spare tire adapter. Constructed from .095" wall steel Single design piece for durability Mounts s spare tire up to 35" diameter to your factory carrier No-drill Bolt-on design Durable gloss black powder coating Make space for your sizable spare with an N-FAB Spare Tire Relocation Bracket. Bolts on to your existing bracket it accommodates the larger tire by moving ...
At ARIES, we know what it means to be a Jeep owner. We know that the sky is your roof, the rocky slopes are your bread and butter, and the mud in your tires is the blood pumping through your veins. Owning a Jeep means fueling up with more than just gasoline because it's passion that drives you every time you turn the ignition. That same passion has been our inspiration for the ARIES line of Jeep ...
5-gallon Scribner Kit Includes 1 Mounting Tray & 1 Tie down Strap for Motorcycle Race Can by itself does not adapt to UHG series. Can Not Included. ...
Part No: HGR2050-Kit
Wilco OffroadWilco Offroad
Dan's Hi-Lift Mount
Horizontal below tire mounts behind tire mount, includes mount and hardware compatible with all HAT fuel ...
Part No: Dan's Hi-Lift
Fits UHG1060 UHG1070 only. Includes Mounts ...
Part No: CM23181
Wilco OffroadWilco Offroad
Security Cable
Black steel cable weather resistant by Master ...
Part No: 61DAT
Wilco OffroadWilco Offroad
Race Can Strap
Used on P/N HGR2050 Strap Only. Can and Mounting Base Not ...
Part No: TDR2050
Hitchgate, Motorcycle Race Can Mounting Kit Kit Includes, Mounting Bar, 2 Mounting Trays and 2 Straps for Motorcycle Race Cans (Cans Not ...
Part No: HAT2000-RK
N-FABN-FAB
Replacement Oversized Tire Carrier for Jeep Wrangler JKCarry a Tire up 37" Diameter in The Factory Location
N-FAB's Oversized Tire Carrier for Jeep JK Wrangler. Mounts a tire up to 37" in the stock location. N-Fab's quality allows this tire carrier to handle up to 195 lbs. 3 Stage powder coating process provides superior corrosion resistance. Textured black powder coating blends with factory black accents. Made in the USA 5 year finish and Limited Lifetime Structural Warranty This is the ...
Wilco OffroadWilco Offroad
Steel Jerry Can Kit
Stand alone tray and strap Kit Includes 1 Mounting Tray and 1 Tie down Strap for Jerry Can. Can Not ...
Part No: HGG 2070
Tough CountryTough Country
Jeep Tire Holder
The Jeep Tire holder is made to mount to the Tough Country Jeep rear bumper. This solid frame bolts to the deck of the bumper and can hold up to a 37" Tire. ...
Wilco OffroadWilco Offroad
Master Lock
Black lock with key weather resistant Master ...
Part No: 311D