WeatherGuardWeatherGuard
Ladder Rack WEEKENDER Removable RackEasily Installed and Removed Buy a Pair or Just One
Fits 1995 and newer Chevrolet, Dodge, Ford and Toyota Tundra pickups Load capacity of 250 lbs Easy on, easy off for the occasional need to carry a ladder or long materials Adjustable, tubular steel pockets bolt into the side of the truck bed Load bar is adjustable to accommodate varied ladder widths Constructed of 1-1/2 in x 1-1/2 in 14-gauge wall steel tubing Joints are fully ...
The Pickup Pack Truck boxes a unique setup for pickup trucks that combines lockup security, maximum storage, and is built to lastall in an attractive aluminum body that can be easily installed on your pickup. It's sure to draw lots of attention on the construction site. This "service body in a pickup" includes a gull wing saddle box, two lockable low side boxes, a flat or dome center hatch, and a ...
Part No: pickuppack
Buyers ProductsBuyers Products
PVC Conduit Carrier KitChoose 4" 6" or 8" Diameter Does Not Include Conduit Pipe
Easily access conduit with a spring-loaded latching mechanism. Lock and secure conduit by adding a padlock to the pre-drilled tabs on carrier cap (padlock not included). Includes everything you need to build and mount a conduit carrier. Build to any length needed. Conduit pipe sold separately. Buyers Products PVC Conduit Carrier Kit is designed to mount on ladder racks and can be adjusted ...
BACKRACKBACKRACK
Light Bracket Mounts For BackrackChoose Left Right or Center Mount Brackets
Headache Rack Mounting Brackets For Safety Lights. Complete your headache rack installation and install your lights with mounting brackest mad to fit your specific rack. These brackets work with "teardrop" style lights. Choose your, rack style, base width and mounting location from the information below. Rack Product Abbreviation Key: HL-Half Louver SM-Half safety TR-Three Round ...
Kargo MasterKargo Master
Quick Clamp Cross Bar for Pro II Ladder RackAdd Extra Support Where It's needed
Kargo Master's Pro II Quick Clamp Cross Bar can be positioned anywhere along the length of the rack. It provides additional support where needed. Easily removed with tools to accommodate taller loads. It only works on the Kargo Master Pro II Ladder Racks. Only available in black. The PRO II quick clamp crossbar adds even more utility to your truck's ladder rack. Carry shorter loads, mixed ...
Part No: 31110
Cross TreadCross Tread
300 Series Van Rack Extra Cross Rail1 Extra Bar For 300 Series Van rack
3rd Bar For Better Load Stability Adjustable from 40" to 68" Match your 300 series rack finish Same installation as your 300 series rack White or Black Powder Coating Ford and GMC Fits Available The extra cross rail has the same, fixed mount as the 300 Van Rack. Position this rail wherever you need it and carry different length cargo safely. ...
Description: - Conduit cap and hatch are made from 5052 Aluminum - Tube is made from 6061 aircraft grade aluminum - 2mm thick tube walls - 2 semi-circle compartments - Additional divider available to create 4 compartments - 6" diameter tube - 128" long tube - Shipped in segments Product includes: - Front Cap. - Rear hatch. - X2 U-Brackets. - 4X half moon compartment aluminum tubes (Equals 128") ...
Kargo MasterKargo Master
PRO II and PRO III Camper Shell Rack Leg ExtensionsExtended Legs For Use With Raised Roof Camper Shells
Sold in sets of 4 they provide and additional 6" of clearance. Designed to work with Kargo Master PRO II and III Camper Shell rack. For trucks with high rise camper shells. Premium Powdercoat Finish Fve Stage Metal Pre-Treatment Marine Grade Powder Coat Finish Specially Formulated To Resist Corrosion And Abrasion Will Not Fade Or Dull Available In Gloss Black Only Use your PRO II or ...
Kargo MasterKargo Master
Utility Hook For PRO Ladder RacksClamps Directly Your Rack Positioned Where You need It
Outboard Side Mount Hook Holds Coiled Materials Or Sheet Metal Break Within Easy Reach Of The Ground. Premium Powdercoat Finish Fve Stage Metal Pre-Treatment Marine Grade Powder Coat Finish Specially Formulated To Resist Corrosion And Abrasion Will Not Fade Or Dull Available In Gloss ...
Part No: 31150
Kargo MasterKargo Master
Window Guard
Designed for PRO II and PRO 80000 Only. Protects your rear cab window. It also reinforces the truck bed so there's no spreading apart under heavy loads. Made from reinforced 16 gage rolled steel. Available in black ...
These accessory bed rail rack mounts distribute the load and protect the truck's bed rail. They also provide rack attachment points along the entire length of the truck bed. Can be used with our accessory Stake Pocket "T" Bolts to securely mount your rack without drilling into the truck bed. Providing a flat base for mounting tool box or tonneau cover. ...
Cross TreadCross Tread
600 Series Van Rack Extra Cross RailAdds Stability and Carrying Capacity
3rd Bar For Better Load Stability Adjustable from 43" to 72" Matches your 600 series rack finish Same clamp on installation as your 600 series rack White or Black Powder Coating Ford and GMC Fits Available The extra cross rail has the same simple gutter mount as the Van Rack. Position this rail wherever you ...
Kargo MasterKargo Master
Ladder Rack Emergency Clamp On Light BracketEasy Clamp On Emergency Light or Antenna Bracket
Emergency flasher lights or antenna's can be mounted anywhere along the side channel. The 7" wide slotted mount plate can accommodate bolt patterns of most sizes and brands of lights. High gloss black marine grade powder coat 1000 hours ASTM salt spray resistance Available in black only Mounts emergency flasher light or antenna anywhere along side channel of rack. Slotted mount plate ...
Part No: 31170
Cross TreadCross Tread
Extra Cross Rail XTra Bar For Renegade Pickup Truck RacksRAIL ONLY Add Capacity and Stability to Your Renegade Truck Rack
Extra cross rails add stability to your loads, allow safe transport of different length items and add some extra weight capacity. Easily installed or removed and adjustable along the length of your rack. Add ladder positioners for extra stability Since opening in 1963 Leonard Buildings and Truck Accessories' goal has always been ...
Part No: CRT-81411
Product includes: - Front Cap. - Rear hatch. - 2X U-Brackets. - 4X 1" X 1 1/2" Conduit C-Clamps - Hardware to mount onto a 1" X 2" cross bar (H1 System). Can fit onto a 1" X 2" cross bar such as Vantech A500, A613 cross bars. *6" PVC not included. -Scroll down for more mounting options See more products in Truck Racks > Roof Racks ...
Kargo MasterKargo Master
Front Bar Wind DeflectorFor PRO II, III, IV
Fully adjustable to deflect wind and reduces noise. Easy install with a hose clamp type installation. Works with any Pro II, III, or IV Kargo Master Ladder Rack. Only Available in Black Kargo Master racks are designed to minimize wind noise, but sometimes cab lights, atmospheric conditions or ...
Part No: 31570
ACCESS COVERACCESS COVER
ADARAC Load DividersFits Solid Bar ADARAC Racks
(1)
Load Dividers For ADARAC Sold in pairs Use on front or rear cross bar Adjustable spacing for different size loads Tie Downs secure into openings provided For ADARAC Channel Mount Style racks order 4000880 Ford, Chevy, GMC, Dodge, Ram, Nissan, Honda, Jeep and Toyota Truck owners may disagree on which brand ...
Part No: 70770
WeatherGuardWeatherGuard
Conduit Carrier Diamond Plate AluminumCarry Up to 10' of Conduit
Conduit Carrier Fits All-Purpose, Quick Clamp and Safari Roof Racks Diamond-plate Aluminum ARMOR-TUF Clear Coat finish Stores up to 10 ft long sections of conduit Keep conduit or long tools safe, secure and clean with the lightweight and durable Model 237 Diamond-plate Aluminum Conduit Carrier. 11' long allows safe and secure carrying of conduit up to 10' long. If you have fitment ...
Part No: 237
Model 70532 Replacement EZGLIDE2 Fixed Drop-down Mechanism If you have fitment questions please contact us Since opening in 1963 Leonard Buildings and Truck Accessories' goal has always been to provide quality truck accessories at the lowest prices. Ford, Chevy, GMC, Dodge, Ram, Nissan, Honda, Jeep and Toyota Truck owners may disagree on which vehicle brand is better but they can ...
Part No: 70532
WeatherGuardWeatherGuard
Channel Mount Kit Full-Mid and High Roof Vans113 Inches Long Easily Mount Various Ladder and Roof Racks
Distributes roof loads across van manufacturers' mounting points Designed for Sprinter and Low-Roof Nissan NV vans Simplifies ladder rack installation on low-roof Nissan and mid and high roof Sprinter vans without adding holes Lightweight aluminum construction maximizes roof carrying capacity Includes roof mounting hardware The Model 2113-0-01 mounting channel kit distributes roof load ...
Part No: 2113-0-01
WeatherGuardWeatherGuard
Conduit Carrier KitUses Common 6" PVC
Model 239 Conduit Carrier Kit Fits All-Purpose, Quick Clamp, EZ-GLIDE, and Safari Roof Racks Plastic caps with Stainless Steel mounting hardware PVC not included. Separately purchase a section of 6 in PVC ASTM D2665 pipe Keep conduit safe, secure and clean with the lightweight and durable Model 239 PVC Conduit Carrier Kit. Coordinate the length of 6 in PVC pipe for the length of conduit ...
Part No: 239
ACCESS COVERACCESS COVER
ADARAC Load Dividers Channel Mount StyleFits Channel Mounting ADARAC Racks
Load Dividers For ADARAC Freely Reposition Along Crossbars To Stabilize Secures Cargo 100 lb. Maximum Capacity Per Load Divider Set Of 2 For newer style channel mounting style ADARAC Racks. Ford, Chevy, GMC, Dodge, Ram, Nissan, Honda, Jeep and Toyota Truck owners may disagree on which brand pickup is better but they all agree that Leonard Truck Accessories is the perfect place to buy ...
Part No: 4000880
TracRacTracRac
Thule TracRac SR Sliding Toolbox Mount KitWorks With TracRac SR No Drilling Required
Use your TracRac SR sliding system to move your toolbox Slide your toolbox anywhere along your bed No drilling required Requires TracRac SR sliding Rack System Rails Toolbox must clear wheel wells for full bed access Extruded aluminum for extreme weather protection Made in The USA Making use of TracRacs SR's unique sliding rack system now you can move your toolbox easily along the ...
Part No: TRC-25200
Brute Tool BoxesBrute Tool Boxes
Conduit Carrier Rack Mount BoxA Buyer's Best Choice in Rack Mounted Conduit Carriers
Commercial Class Cargo Management Equipment .063 Thick Aluminum Construction 6" High x 11" Wide x 121.5" Long Installation Kit Included Attaches to Most Ladder Racks Lockable Rotating Hasp Latch Spring Loaded Door Can be Shipped UPS or FedEx Not Available in Black Brute's Conduit Carrier provides a safe harbor for PVC or valuable freight essential to get the job done. Brute ...
Part No: CC121
Kargo MasterKargo Master
Conduit Box
Carrying stall safely secures tubing or pipe to your rack. Made of heavy gauge powder coated steel. Includes complete mounting bracket kit. Use with Kargo Master's load dividers or when Conduit Boxes are used in pairs, cargo can be locked to prevent theft. Available in black ...
Part No: 31000
Kargo MasterKargo Master
Ladder Rack Adjustable Front Truck Bed SupportsAdditional Support Protects Your Bed When Carrying Heavy Loads
These adjustable struts (sold in sets of two) transfer much of the rack load from the bedrail to the floor of your truck. Use in front only. Recommended if you intend to carry heavy loads. High gloss black marine grade powder coat 1000 hours ASTM salt spray resistance Zinc Epoxy undercoat. Available full size trucks only. Ford, Chevy, GMC, Dodge, Ram, Nissan, Honda and Toyota Truck owners may ...
Part No: 31040
Cross TreadCross Tread
400 Series Van Rack 3rd BarSame No Drill Installation as The 400 Rack
3rd Bar For Better Load Stability Adjustable from 43" to 72" Matches your 400 series rack aluminum finish Same clamp on installation as your 400 series rack White or Black Powder Coating Ford and GMC Fits Available The extra cross rail has the same simple, gutter mount, as the Van Rack. Position this rail wherever you need it and carry different length cargo safely. ...
Kargo MasterKargo Master
Service Body Mount KitDiscontinued Now Include With Service Body Racks
These Kits By Themselves Have Been Discontinued But Are Included With The Service Body Racks Listed Elswhere On This Site: For use when there is a box lock or tail light that prevents use of the standard rear mount bracket. They aredesigned to mount on the outside edge of the rear panel of your service body. Compatible with Stahl GTX style rack with a plastic cap on the back end of the ...
Part No: 70060
WeatherGuardWeatherGuard
Ladder Rack Mounting Kit For Low Roof VansChannel Style Uses Existing OEM Mounting Holes
Distributes roof loads across OEM roof mounting points Designed specifically for Ford Transit 130" and 148" WB and Nissan NV Low-mid roof vans. Simplifies ladder rack installation on new low roof vans without adding holes Light weight aluminum construction maximizes roof carrying capacity Includes roof mounting hardware Use with Quick-Clamp, All-Purpose and EZGlide2 Ladder Racks. The ...
Cross TreadCross Tread
Aluminator Extra Single Cross Rail BarSingle Cross Rail For Aluminator Truck Rack
Your Aluminator tuck rack come equipped with 3 cross rails. purchase an extra cross rail for a total of 4 giving you better weight distribution and flexibility for varying load lengths especially on the long bed trucks. Buy the best quality, best reviewed, best-priced Rack and Ladder Racks by Cross Tread ...
Part No: CRT-61411
WeatherGuardWeatherGuard
Ladder Rack Velcro Cargo StrapsPrice is For Two Straps
Fits All-Purpose, Quick Clamp, EZ-GLIDE, and Safari Roof Racks Securely hold ladders or other items to ladder rack cross-members. Sold in pairs. Van roof accessories provide added convenience, safety, and enhance on-the-job performance. The Model 2503 Accessory Velcro Straps fit All-Purpose, Quick Clamp, EZ-GLIDE and Safari Roof Racks to securely hold ladders or other items to the Ladder Rack ...
Part No: 2503
WeatherGuardWeatherGuard
Ladder Rack Quick Clamp Full Size VanDual Side Gutter Mount Express Savanna and Older E-Series
Curved cross-members reduce the height to load and unload the ladder rack Dual gas-spring assisted clamps on street and curb side Dual Clamp on street and curb side Designed for full-size vans like GMC Savana, Chevy Express and Ford E-series vans Combine with accessory cross-member Model 233-3-01 for a center support Light weight aluminum construction maximizes roof carrying capacity ...
Part No: 234-3-01
Optional 6" Aluminum Conduit Carrier Extension specifically for the CC121 Carrier. ...
Part No: CC006
Cross TreadCross Tread
660 Series Van Rack Extra Cross RailAdd Stability and Capacity
3rd Bar For Better Load Stability Adjustable from 60" to 66" Matches your 660 series rack aluminum finish Same clamp on installation as your 600 series rack Ford and GMC Fits Available The extra cross rail has the same simple gutter mount as the Van Rack. Position this rail wherever you need it and carry different length cargo safely. ...
Cross TreadCross Tread
800 Series Van Rack Extra Cross Rail by Cross TreadCarry More While Adding Stability and Capacity
3rd Bar For Better Load Stability Adjustable from 43" to 72" Matches your 800 series rack aluminum finish Same clamp on installation as your 800 series rack White or Black Powder Coating Ford and GMC Fits Available The extra cross rail has the same simple gutter mount as the Van Rack. Position this ...
Cross TreadCross Tread
Extra Cross Rail XTra Bar For Steel 1500 Pickup Truck RackAdd Stability and Capacity With an Extra Croos Bar
Extra cross rails add stability to your loads, allow safe transport of different length items and add some extra weight capacity. Easily installed or removed and adjustable along the length of your rack. Add ladder positioners for extra stability Picture shows entire rack this item is 1 cross rail only. Since opening in ...
Part No: CRT-81551
Cross TreadCross Tread
Extra Cross Rail XTra Bar For Steel 750 Pickup TruckSingle Cross Rail for 750 Truck Ladder Rack
Cross Rail Only Extra cross rails add stability to your loads, allow safe transport of different length items and add some extra weight capacity. Easily installed or removed and adjustable along the length of your rack. Add ladder positioners for extra stability Since opening in 1963 Leonard Buildings and ...
Part No: CRT-87551
WeatherGuardWeatherGuard
Ladder Rack Quick Clamp Compact VanMount With 2085-0-01 Channel Rail Kit Sold Separately
New 60 inch wide two cross-member Quick Clamp aluminum van rack Dual gas-spring assisted clamps on street and curb side Designed for compact vans like Ford Transit Connect, Nissan NV200, Chevrolet City Express and RAM ProMaster City Combine with accessory cross-member Model 225-3-03 for a three cross-member van rack Use with Model ...
Part No: 224-3-03
WeatherGuardWeatherGuard
Extra Cross Member Gutter Mount SteelRain Gutter Mount Extra Cross Bar Full Size Van
Works with Model 205-3 and Model 216-3 full size van steel roof racks Fits vans with rain gutters including Chevy Express, GMC Savana, and Ford E-series Brite White ARMOR-TUF Powder Coat finish Add extra carrying capacity to Weather Guard 205-3 and 216-3full-size van steel roof rack with an accessory cross member. Model 2056-3 attaches easily to provide needed extra support. If you have ...
WeatherGuardWeatherGuard
Ladder Rack Quick Clamp Dual Side Low Roof Full Size VanDual Side Clamp Channel Mount Full Size Low Roof Vans
New 70 inch wide two cross-member Quick Clamp aluminum van rack Dual gas-spring assisted clamps on street and curb side Dual Clamp on street and curb side Re-designed for new low-roof full-size vans like Ford Transit, Nissan NV as well as GMC Savana, Chevy Express and Ford E-series vans Combine with accessory cross-member Model 233-3-03 for a center support Use ...
Part No: 234-3-03
WeatherGuardWeatherGuard
Ladder Rack Mounting Kit For Compact VansChannel Style Uses Existing OEM Mounting Holes
Simplifies ladder rack installation on most new vans models without adding holes Light weight aluminum construction maximizes roof carrying capacity Distributes roof loads across van manufacturers' mounting points Includes roof mounting hardware Use this mounting kit with EZGlide2, All-Purpose ladder Racks, and Quick Clamp Aluminum ladder racks. Designed for Ford Transit Connect, RAM ...
Part No: 2085-0-01
WeatherGuardWeatherGuard
Accessory Warning Light HolderWarning Light Mount Round Base
Warning Light Holder Fits All-Purpose, Quick Clamp, EZ-GLIDE, and Safari Roof Racks All aluminum construction Brite White ARMOR-TUF Powder Coat finish The Model 2501 Accessory Warning Light Holder fits All Purpose, Quick Clamp, EZ-GLIDE and Safari Roof Racks providing a light on top of the vehicle when it is needed to meet safety requirements. If you have fitment questions please ...
Part No: 2501
WeatherGuardWeatherGuard
EZGLIDE2 Accessory Cross MemberMaximize The Carrying Capacity of Your EZGLIDE2
Designed for Ford Transit Connect, RAM ProMaster City, Nissan NV200, Chevy City Express, and RAM CV vans Use with Model 2085-0-01 Mounting Channel kit Light weight aluminum construction maximizes roof carrying capacity Brite White ARMOR-TUF Powder Coat finish The Model 2060-3-01 60 inch wide accessory cross member add extra carrying capacity to the EZGLIDE2 compact van roof rack with . ...
WeatherGuardWeatherGuard
Conduit Carrier 6 inch ExtensionEasy Addition to Your Weather Guard Conduit Carrier
Fits All-Purpose, Quick Clamp, and Safari Roof Racks Diamond-plate Aluminum ARMOR-TUF Clear Coat finish Get more use from the Model 237 Aluminum Conduit Carrier with the Model 238 Extension Kit. Extends the Model 237 by 6 in. Mounts between the 2 pieces of existing conduit carrier. If you have fitment questions please contact us Since opening in ...
Part No: 238
WeatherGuardWeatherGuard
Accessory Mirror for EZGLIDEMirror Only Mounting Kit Sold Separately
Fits EZ-GLIDE System racks Use with Model 2502 Mirror Holder All aluminum construction Brite White ARMOR-TUF Powder Coat finish Van roof accessories provide added convenience, safety, and enhance on-the-job performance. The Model 2504 Accessory Hyperbolic Mirror fits EZ-Glide System racks and mounts on the Model 2502 Mirror Holder to improve visibility for the driver around the vehicle. ...
Part No: 2504
WeatherGuardWeatherGuard
Mirror Holder For EZGLIDEExpand Your View Around Your Van
Mirror Holder Fits EZ-GLIDE System racks Not for use with driver side drop-down kit All aluminum construction Brite White ARMOR-TUF Powder Coat finish The Model 2502 Accessory Mirror Holder fits EZ-Glide System racks and mounts a hyperbolic mirror to the drive side of the van to improve visibility for the driver around the vehicle. If you have fitment questions please contact ...
Part No: 2502