Darby IndustriesDarby Industries
Roof Rack Universal Turbo RackRemovable Universal Roof Rack
(4)
Universal Fit Single Roof Rack Quickly attaches to most vehicles Easy to use High density foam towers will not scratch roof Steel Support bar features Quick-Release width adjustment Simple, strap-thru design and NO tools required 2 TURBO-RACKS can be used on a car roof Ideal for use with the available EXTEND-A-TRUCK receiver hitch load ...
Part No: TURBORACK
The Vantech H1 steel system can hold up 600lb (evenly distributed). The Cross bars is 2 X 1 rectangular 14 gauge heavy duty. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 11 gauge at the base and are galvanized before powder coating. The Mounting uprights are 8 extra wide base at 16.5 total height. The Base is welded complete onto upright post for complete ...
The Aluminum M2000 with 60 Cross Bars is a universal rack system that can be installed on any vehicle with or without drip rails (drilling required). The mounting bases are 3 mm thick and have an extra wide 4.5 X 1 mounting base, polyfoam gasket and 4.5 X 1 interior plate secures the rack system onto the vehicle.This system weighs in at 14 lbs. with stainless steel hardware. Max load capacity of ...
This Original Equipment (OE) system fits onto the stock bars or rails of your vehicle up to 1.5 height and 2 width, no drilling required. The clamps are 4mm thick aluminum and dipped in rubber for extra protection. The A285 crossbars are 2 X 1.5 reinforced aluminum with channels. For load capacity read the factory manual for your vehicles weight load specifications. Installation time may only ...
The Cross bars is 2 X 1 Reinforced extruded aluminum crossbars with internal structural support. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 3mm thick at the base and powder coated. The Mounting uprights are 8 extra wide base at 10.5 total height. The Base is welded complete onto upright post for complete seal. There are 4 X 3/4 eyehooks per mounting ...
This Original Equipment (OE) system fits onto the stock bars or rails of your vehicle up to 1.5 height and 2in width, no drilling required. The clamps are 4mm thick aluminum and dipped in rubber for extra protection. The A285 crossbars are 2in X 1.5 reinforced aluminum with channels. For load capacity read the factory manual for your vehicles weight load specifications. This system includes 4 X 2. ...
The Aluminum M1000 with 50 Cross Bars is a universal rack system that can be installed on any vehicle with or without drip rails (drilling required). The mounting bases are 3 mm thick and have an extra wide 4.5 X 1 mounting base, polyfoam gasket and 1 X 5 interior plate secures the rack system onto the vehicle. This system weighs in at 14 lbs. with stainless steel hardware. The max load capacity ...
The J1000 is a low profile (3.5) aerodynamically designed rack system that can fit any vehicle with or without drip rails. The unique shape of the crossbars minimizes wind noise. The A285 crossbars are reinforced aluminum with channels and can support ...
Part No: J1000B
The Vantech H1 steel system can hold up 600lb (evenly distributed). The Cross bars is 2 X 1 rectangular 14 gauge heavy duty. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 11 gauge at the base and are galvanized before powder coating. The Mounting uprights are 8 extra wide base at 10.5 total height. The Base is welded complete onto upright post for complete ...
49 inch usable ...
Part No: RB-1001-49
The Vantech H1 Aluminum system can hold up 600lb (evenly distributed). The Cross bars is 2 X 1 Reinforced extruded aluminum crossbars with internal structural support. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 3mm thick at the base and powder coated. The Mounting uprights are 8 extra wide base at 10.5 total height. The Base is welded complete onto ...
The Steel M1000 with 50 Cross Bars is a universal rack system that can be installed on any vehicle with or without drip rails (drilling required). All steel systems are galvanized and powder coated for superior protection. The extra wide 6 X 1.5 mounting base uses polyfoam gasket and 4.5 X 1 interior plate to secures the rack system onto the vehicle. Cross bars are made with 14 gauge steel and ...
The Steel M2000 with 50 Cross Bars is a universal rack system that can be installed on any vehicle with or without drip rails (drilling required). All steel systems are galvanized and powder coated for superior protection. The extra wide 4.5 X 1 mounting base, polyfoam gasket and 4.5 X 1 interior plate secures the rack system onto the vehicle. Cross bars are made with 14 gauge steel and mounting ...
The Steel M3000 with 59 Angled Cross Bars is a universal rack system that can be installed on any vehicle with or without drip rails (drilling required). The cross bars are arched for easy ladder access from side of vehicle. All steel systems are galvanized and powder coated for superior protection. The extra wide 4.5 X 1 mounting base, polyfoam gasket and 4.5 X 1 interior plate secures the rack ...
49 inch usable span with a 180 lb. capacity. ...
Part No: RB-1004-49
The Aluminum M1000 is a universal rack system that can be installed on any vehicle with or without drip rails (drilling required). The mounting bases are 3 mm thick and have an extra wide 4.5 X 1in mounting base, polyfoam gasket and 4.5 X 1in interior plate secures the rack system onto the vehicle.This system weighs in at 14 lbs. with stainless steel hardware. Max load capacity of this system is ...
Part No: M1100B
49 inch usable span with a 180 lb. capacity. ...
Part No: RB-1512-FR
49 inch usable ...
Part No: RB-1006-49
Key Lockable. 150lb capacity. ...
Part No: RB-1512E
The Aluminum M3000 with 59 Angled Cross Bars is a universal rack system that can be installed on any vehicle with or without drip rails (drilling required). The cross bars are arched for easy ladder access from side of vehicle.The mounting bases are 3 mm thick and have an extra wide 4.5 X 1.4.5 mounting base, polyfoam gasket and 4.5 X 1 interior plate secures the rack system onto the vehicle.This ...
The J1000 is a low profile (3.5) aerodynamically designed rack system that can fit any vehicle with or without drip rails. The unique shape of the crossbars minimizes wind noise. The A285 crossbars are reinforced aluminum with channels and can support 400 lbs. Mounting bases 4 wide with 3.5 interior plates, 11-gauge high strength steel. In total the system weighs in at only 12 lbs. ...